페이지 정보
본문
제품명
DC Power Supply
제조사
TEXIO, KENWOOD
모델
PDS60-12
가격
문의요
렌탈
문의요
첨부파일
상세내용
| Output | |
| Output voltage range (V) | 0 - 60 |
| Output current range (A) | 0 - 12 |
| Rated output power (W) | 720 |
| Output terminal | Front |
| Voltage regulation characteristics | |
| Line regulation | 0.005% 1 mV (for ± 10% source voltage fluctuation) |
| Load regulation | 0.005% 2 mV (for 0 to 100% fluctuation) |
| Ripple /noise, p-p (By 20MHz Scope) | 30 mVp-p |
| Ripple /noise, rms (5 Hz to 1 MHz) | 1 mVrms |
| Transient response (typ.) | 100µsec |
| Temperature coefficient (typ.) | ± 100 ppm/°C |
| Rise time (typ.) | Full load / no load 100msec / 100msec |
| Fall time (typ.) | Full load / no load 150msec / 1000msec |
| Current regulation characteristics | |
| Line regulation | 5mA |
| Load regulation | 5mA |
| Ripple noise, rms (5 Hz to 1 MHz) | 10mA |
| Temperature coefficient | ± 100ppm/°C |
| Display | |
| Voltage display, accuracy (23±5°C) | 3 1/2 digits LED‚ 0.1% rdg ± 2 digits‚ 10mV accuracy |
| Current display, accuracy (23±5°C) | 3 1/2 digits LED‚ 0.5% rdg ± 2 digits‚ 10mA accuracy |
| In constant voltage/ current operation | CV LED on/ CC LED on |
| Output signals | |
| Alarm signal output | Open collector‚ active Low Operation functions (5ms one pulse) |
| Operation function | |
| OVP key | Displays OVP circuit operating voltage on front panel‚ which is variable between 10 and 110% of F.S |
| KEYLOCK (LOCAL) key | Locks keys and knobs (except POWER switch). Also removes remote control |
| PRESET 1 - 3 keys | Used with MEM key to memorize three output voltages and currents |
| MEM key | Used with PRESET keys to memorize three output voltages and currents |
| FAST/SLOW key | Changes output voltage and current setting speed |
| ON/OFF control | Enabled with input contact signals |
| POWER switch shut-down | Enabled with input contact signals |
| Output voltage remote sensing | Compensates for 1 V voltage drop on single side |
| Protection | |
| Over voltage protection (OVP) | POWER switch off at setting value |
| Over current protection (OCP) | POWER switch off at setting value |
| Overheat protection (OHP) | POWER switch off at setting value |
| Soft OVP (OVD) | Set from external controller in remote control mode. POWER switch off when soft OVP is active |
| Environmental request | |
| Operating temperature / humidity range | 0 to 40 °C / 30 to 80 % RH |
| Stocking temperature / humidity range | -20 to 70 °C / 20 to 80 % RH |
| To-GND voltage | ± 250 VDC |
| Cooling method | Front air intake type forced air cooling with fan motor Insulation resistance |
| Power source | |
| Input voltage | AC 90 to AC 264 V‚ 50/60 Hz without setting change |
| Power factor (typ) | 95% |
| Power consumption (typ) | 1050 W |
| Power efficiency (typ) | 72% |
| Dimensions / Weight | |
| Dimensions (W ¥ H ¥ D) mm | 210 × 124 × 405 (W × H × D)mm |
| Maximum dimensions (W ¥ H ¥ D) mm | 210 × 141 × 417.5 (W × H × D)mm |
| Weight (approx.) | 7.2 kg |
| Options | |
| Analog I/O board | V/I controlled by external voltage or resistance |
| GP-IB interface board | V/I set/read‚ Output ON/OFF‚ AC shout down |
| RS-232C interfaceboard | V/I set/read‚ Output ON/OFF‚ AC shout down |
| Output capacity extension | Parallel connection control : Master-slave system‚ up to 3 units Series connection control : Master-slave system‚ up to 2 units |
- 이전글High Voltage DC Power Supply 25.03.21
- 다음글Linear Type DC Power Supply 25.03.21
댓글목록
등록된 댓글이 없습니다.